Elektralite P100 Manual Part Two Bedienungsanleitung PDF herunterladen (Seite 51)

123

FUNCTION FIRST BUTTON SEQUENCE SECOND BUTTON SEQUENCE NOTES

1. To select a fixture group Press GROUP 2 ENTER This will give you Group 2. The fixture

group display is virtually the same as

the fixture feature display. The difference

is that on the top right hand

side are the words "fixture(12):1

The figure in the ( ) tells you how

many fixtures are in your group. The

number after the ":" tells which fixture

is currently active. With a mixed group

of different fixtures the display is

marked with Type: (mixed).

2. To change to another fixture Place the cursor over the number Use the "Yes" or "No" Keys.

after the " : "

VERY USEFUL TOOLS

(Tools such as those listed below are only supported if the fixture manufacturer has supplied Group One Ltd. with the neccessary DMX values).

FUNCTION FIRST BUTTON SEQUENCE SECOND BUTTON SEQUENCE NOTES

1. To select a color without using Press COLOR "?" Pressing the color button and then a

the rotaries. number, for example 3, will bring

the third color of a SUPPORTED

color wheel.

2. To select a color from a second Press COLOR 2@3 This will give you the third color

color wheel (if the fixture has two from the second color wheel.

color wheels, of course).

3. To select a gobo without using Press GOBO "a number" Pressing the gobo button and then a

the rotaries number, for example 4, will bring

the fourth gobo of a SUPPORTED

gobo wheel.

4. To select a gobo from a second Press GOBO 2@4 This will give you the fourth gobo

gobo wheel (if the fixture has from the second gobo wheel.

two gobo wheels, of course!).

STORING A PRESET

FUNCTION FIRST BUTTON SEQUENCE SECOND BUTTON SEQUENCE NOTES

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 79 80

Keine Kommentare

Elektralite P100 Manual Part Two Bedienungsanleitung Seite 51